Foley 622 SO, Operator'S Manual

Page: 5 / 32

5
- ORIGINAL INSTRUCTIONS -
TABLE OF CONTENTS
Safety Message ......................................................................................................... 4
Safety Instructions .................................................................................................... 5-11
Machine Installation and Wiring Information .......................................................... 12-15
Getting to Know your Grinder .................................................................................. 16-21
Operating Instructions .............................................................................................. 22-34
Setup Chart ............................................................................................................... 35
This machine is designed for sharpening reel type mower blades ONLY. Any use
other than this may cause personal injury and void the warranty.
To assure the quality and safety of your machine and to maintain the warranty,
you MUST use original equipment manufacturer's replacement parts and have any
repair work done by a qualified professional.
ALL operators of this equipment must be thoroughly trained BEFORE operating the
equipment.
Do not use compressed air to clean grinding dust from the machine. This dust can
cause personal injury as well as damage to the grinder.
PREPARATION/INSTALLATION CHECK LIST

7. Understand proper positioning of reel.

8. Understand traverse travel stop
positioning

9. Understand how to use the Touch Off method

10. Understand spin speed vs. quality

11. Understand General Maintenance
Before using this equipment refer to the list below. Verify that all of the listed items are completed
before powering up the equipment:
Keep this manual handy for ready reference. Require all operators to read this manual carefully and
become acquainted with all adjustments and operating procedures before attempting to operate the
equipment. Replacement manuals can be obtained from your selling dealer or the manufacturer.
The equipment you have purchased has been carefully engineered and manufactured to provide
dependable and satisfactory use. Like all mechanical products, it will require cleaning and upkeep. Lubricate
and clean the unit as specified. Please observe all safety information in this manual and safety decals on
the equipment.

1. Equipment is completely assembled

2. All shields are in place and in good condition.

3. All decals are in place and readable.

4. Overall condition good (i.e. paint, welds, electrical)

5. Verify there is sufficient electrical power to
operate the machine.

6. Read and understand all areas of the Operator's
manual, and review the Service Manual, and any
additional training material if available.