19
- ORIGINAL INSTRUCTIONS -
OPERATION-WINCH
Front or Rear load electric boom
option with optional rear doors
LIFTING OPTIONS
LIFTING A REEL INTO POSITION
OPTIONAL BOOM WITH ELECTRIC WINCH
1.
Position the reel on the floor so the front of the mower
faces in the same direction as the front of the machine.
2.
Hook the winch spreader bar onto the reel. The clamps
on the spreader bar should be spaced evenly along the
mower so the clamps do not slide as the mower is being
raised.
OPTIONAL ELECTRIC WINCH
Use the WINCH CONTROL connected to the winch to raise
or lower the cutting unit. To lower, press the "DOWN"
button. To raise, press the "UP" button.
OPTIONAL WORKSTATION or ATTACHED LIFT - Can be used
to load from the rear.
For detailed information on the OPTIONAL WORKSTATION,
see the manual included with the Workstation.
Mobil Workstation
Attached lift
Summary of Contents for 622 SO
Page 32: ...32 ORIGINAL INSTRUCTIONS...
