28
- ORIGINAL INSTRUCTIONS -
STEP 3: SPIN GRINDING
OPERATION
CONNECT SPIN DRIVE
spin motor switch
The grinder is supplied 3 spline adapters 8-9-11(part
# 3706130) (See FIG. 27). Use one of these adapters
to connect the SPIN DRIVE MOTOR to the cutting unit
(see FIG. 28). If you need a different adapter, contact
the reel manufacturer.
Choose which side of the reel you want to spin from
and install the SPIN DRIVE MOTOR with the correct
adapter. This will generally be the same drive system
component used for backlapping see FIG. 28.
The SPIN DRIVE MOTOR attaches to the end of the
reel shaft or a drive system component. Consult
the cutting unit manufacturer for proper spin drive
placement and attachment.
NOTE: Ensure spin rotation is the same as the grinding
wheel - clockwise looking from right end. If the reel
is not spinning the correct direction see the service
manual.
FIG. 28
FIG. 27
spin/torque speed dial
spin motor
drive
adapter
cutting unit
LOCK HANDLE
LIFT STRAIGHT UP
TENSION ADJUSTERS
PIN
Summary of Contents for 622 SO
Page 32: ...32 ORIGINAL INSTRUCTIONS...
