Accuracy:
Whilst every effort has been made to ensure the accuracy and
content of this manual, Focusrite Audio Engineering Ltd makes
no representations or warranties regarding the contents.
Copyright:
Copyright January 1999 Focusrite Audio Engineering Ltd. All
rights reserved. No part of this manual may be reproduced,
photocopied, stored on a retrieval system, transmitted or
passed to a third party by any means or in any form without the
express prior consent of Focusrite Audio Engineering Ltd.
Warranty:
All Focusrite products are covered by a warranty against
manufacturing defects in material or craftsmanship for a period
of one year from the date of purchase. Focusrite in the UK, or
its authorised distributor worldwide will do its best to ensure
that any fault is remedied as quickly as possible. This warranty
is in addition to your statutory rights.
This warranty does not cover any of the following:
• Carriage to and from the dealer or factory for inspection or
repair labour charge if repaired other than by the distributor in
the country of purchase or Focusrite in the U.K.
• Consequential loss or damage, direct or indirect, of any kind,
however caused
• Any damage or faults caused by abuse, negligence,
improper operation, storage or maintenance
If a product is faulty, please first contact your dealer in the
country of purchase; alternatively, contact the factory. If the
product is to be shipped back, please ensure that it is packed
correctly, preferably in the original packing materials. We will
do our best to remedy the fault as quickly as possible.
Please help us by completing and returning the Warranty
Registration Card at the back of this manual. Thank you.
www.focusrite.com
SPECIFICATIONS
Inputs:
Electronically balanced, impedance 20K
Ω
,
nominal level +4dBu/-10dBV switchable.
Outputs:
Electronically balanced, impedance 50
Ω
,
nominal level +4dBu.
Unbalanced, ground compensated, impedance
75
Ω
, nominal level -10dBV.
Headroom:
22dB
THD
@ +6dBr, all sections IN, no gain
reduction:
<0.006%(80KHz BW) Distortion during gain
reduction is determined by the attack and
release times set.
Noise
(22KHz):
-100dBr (compressor out)
-87dBr (compressor IN)
Frequency response:
5Hz....0/-2dB
User.qxd 14/01/2000 11:57 Page 31
