CLEANING ((continued)
FIREFRAME - The magnetic frame may be removed for cleaning if required. A wipe with a dry cloth is normally
sufficient, but on stains it is permissible to use a damp cloth with a mild household cleaner, followed by a wipe
with a dry cloth. DO NOT use abrasive cleaners as these may damage the finish. To re-assemble ensure the mag-
nets are in place on the firebox frame, and re-fit to the firebox.
FIREFRONT - Any dust accumulating in the firefront may be removed using a vacuum cleaner or dry cloth. Heavy
stains may be removed by using a damp cloth and mild household detergent. Brass parts of the firefront may be
cleaned using a suitable brass cleaner. Replace the front centrally against the fire after cleaning.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS AND CERAMICS - See the relevant section in the Installation Guide of these instructions. Do not create
dust from the coals. Clean gently in the open air. Replace components with original spares only as necessary.
LIST OF SPARES
PA
ART N
NO.
ITEM
CE/F550012
Pack of 22 ceramic coals
CE/F550013
Pack of 22 ceramic pebbles
CE/F550110
Fuel Matrix & L+R front pieces (coal version)
CE/F550111
Fuel Matrix & L+R front pieces (pebble version)
FT/F730006
Pilot unit
EL/F930017
Remote control (handset only)
Please Enquire Decorative Frame
Please Enquire Decorative Front
4
9.0
8.0
As our policy is one of continuous improvement and development , we hope therefore you will understand we must retain the right to amend details and/or specifica-
tions without prior notice.
DO005530/0
