FUEL BED LAYOUT - ccontinued
5. Finally, take the six remaining pebbles and place at
the back of the fuel matrix as shown.
Once again, the pebbles may be orientated as desired
in order to give a realistic effect. Avoid pushing the
pebbles down between the supports. The fuel bed
layout is now complete.
The fire is designed to operate correctly with the pebbles supplied when assembled according to the instructions.
Never add to the twenty-two pebbles, or change them for a different type. Never throw rubbish or other matter
onto the fuel bed.
Due to the light colour of the pebbles, some discolouration/sooting is to be expected during normal use.
INSTALLING TTHE BBATTERIES ((remote ccontrol vversions oonly)
Handset - Remove cover from rear of handset and insert 1 x ‘PP3’ (9 volt) battery - Replace cover
Appliance - Ensure aappliance iis ooff aand ccool. Remove cover from top of receiver box. The cover is protected by
reflective foil, and located towards the right hand side, underneath the burner unit. Insert 4 x ‘AA’ (1.5 volt) bat-
teries - Replace cover.
FITTING THE DECORATIVE FRAME AND FRONT
The appliance is supplied with a decorative frame in a variety of finishes. The frame is of three-piece design and
is held onto the firebox by magnets
Firstly attach two magnets (one at the top and one at the bottom) to each side piece and then attach to the sides
of the firebox frame. Attach the remaining two magnets to the top piece and position on the top of the firebox
frame ensuring the corners meet neatly.
IMPORTA
ANT :: D
Due tto tthe ppossssibility oof ssharp eedggess, ccare sshould bbe ttaken w
when hhandlingg tthe tthree-ppiecce fframe
ccomponentss. TThe uusse oof pprotecctive gglovess iiss rreccommended.
Place the decorative firefront in front of the fire and slide the ashpan door into place. The firefront shown in these
instructions may be different to the one supplied with the appliance.
TESTING AND COMMISSIONING
Turn on and test the gas supply up to the fire for any leaks, in accordance with current edition of BS6891.
When the appliance is first used, protective oils coating the firebox may burn off. It is advisable to ventilate the
room during this period for at least one hour.
11
13.0
12.1
14.0
12.2
