Focal Point Excelsior Expanse Installation And User Instructions Manual Download | Manualshive

Page: 2 / 22

background image

INSTTALLATTION IINSTTRUCTTIONS

PPrelim

minnary N

Notes BBefore IInnstallationn

This appliance is an Inset Live Fuel Effect appliance which provides radiant
warmth utilising the latest type burner technology.

The fire is designed to fit various types of fireplaces and natural draught flues as
listed in the Installation Requirements.

The appliance must be installed by a competent person in accordance with
Gas Safety (Installation and Use) Regulations 1998. It is strongly recommended
that a CORGI registered engineer be used for this purpose.

Read all these instructions before commencing installation.

This appliance must be installed in accordance with the rules in force and only
used in a sufficiently ventilated space.

The appliance is designed for installation on to a non-combustible hearth of at
least 300mm depth.

This appliance is factory set for operation on the gas type, and at the pressure
stated on the appliance data plate.

This appliance is available in either a manual control version, or a battery pow-
ered remote control version, with a number of fuel effect options. These
instructions cover both control options, and all fuel effect options. See the rele-
vant sections of these instructions for further details.

«
1
2
3
4
...
»

Summary of Contents for Excelsior Expanse























Reviews:

No comments

Related manuals for Excelsior Expanse

Cleveland CMSF-1/0310

Brand: Warm House Pages: 19

Brand: Sunjoy Pages: 5

Brand: Glow Fire Pages: 101

Brand: EdilKamin Pages: 28

Brand: Woodbridge Fireplace Inc Pages: 48

Superior Fireplaces Merit WRT2042WS

Brand: IHP Pages: 24

Brand: Heatilator Pages: 3

Madrona MF28JLN NG

Brand: Valor Pages: 42

Brand: RealFlame Pages: 72

ROOM SEALED INSET LIVE FUEL EFFECT GAS FIRE

Brand: Paragon Fires Pages: 28

Brand: HAMPTON BAY Pages: 12

Brand: Bali Pages: 16

Brand: HAMPTON BAY Pages: 8

Brand: Mendota Pages: 80

Sovereign Series

Brand: Majestic Pages: 24

Brand: Dimplex Pages: 12

Brand: JC BORDELET Pages: 22

Brand: NARVI Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands