FUEL BED LAYOUT
Pebble EEffect O
Option
1. Refer back to section 12.0 - Fuel bed layout (coal
effect option) and follow steps 1 and 2. The front
strips and fuel effect matrix used for pebble effect ver-
sions are of the same design as coal effect versions,
but have a different surface finish.
2. Open the bag of 22 ceramic pebbles. All of these
pebbles are the same size. Take five pebbles and
place them as shown. Care should be taken to ensure
that the pebbles bridge the gap between the front
strip and the six supports at the front of the matrix.
Care should also be taken not to push the pebbles
right down between the supports, as this can affect
the flame picture when the appliance is running.
3. Take five more ceramic pebbles and position as
shown to form the ‘second row’ of the fuel effect. The
pebbles may be rotated as desired to fit into the gaps
between the supports in order to create a random,
realistic effect. Again, remember not to push the peb-
bles down too far into the valleys between the sup-
ports as this can have a detrimental effect to the flame
picture.
4. Now take another six pebbles and place behind the
second row of coals, as shown. The pebbles may be
orientated as desired to achieve a realistic effect.
Keep the spacing between the pebbles even and uni-
form.
10
12.1
