Operating Manual CMGZ 622
53
Tacho diameter
Applies to:
Line
drive
Use:
This parameter stores the diameter of the tacho roller. It is used for
the line speed overlay function.
Range:
A diameter value can be input. The value consists of 4 digits.
Unit:
[mm] or [inch]
Center diameter
Applies to:
Winding
drive
Line
drive
Use:
This parameter stores the diameter of the drive roller. It is used for
the line speed overlay function and for the taper function.
Range:
A diameter value can be input. The value consists of 4 digits.
Unit:
[mm] or [inch]
Max. diameter
Applies to:
Winding
drive
Use:
This parameter stores the diameter of the fully winded reel (Dmax).
It is used for the taper function.
Range:
A diameter value can be input. The value consists of 4 digits.
Unit:
[mm] or [inch]
