Operating Manual BKS309.W.M
22.02.2019
20
Illustration 13: Zero point set outside the
web, e.g. on the machine frame
Illustration 14: Zero point set in the
center of the web, in between the
traverses.
Absolute zero point
6
Web and direction of travel
Home position of each traverse
7
Left traverse, sensor left
2
"Sens R/l" – moving both
sensors at the same time. The
value indicates the position of
the right sensor
8
Right traverse, sensor right
3
Sens L
- distance of the
sensors during movement
Pos. 1
Save Pos – current position
sensor 1
4
Sens L/r – moving both sensors
at the same time. The value
indicates the position of the left
sensor
Pos. 2
Save Pos – current position
sensor 2
How to setup the zero point
•
Mark the desired spot for the zero point e.g. on the machine frame, etc.
clearly with tape, scriber, etc.
•
Measure the distances from the zero point to the sensors and note these
values. Use the marks on the sensor indicating the center of the sensor area
to get distinct values or mark the sensor yourself.
•
Enter the values in the menu for changing the traverse parameters.
•
As soon as you entered the values, the sensor positions will be refereeing to
the zero point.
Key Function
