Operating Manual BKS309.W.M
22.02.2019
22
Drive the sensor to the desired position.
Confirming the selection will store the value
Re-positioning a single sensor – Reference to other sensor
Scroll through the list of parameters to the menu point [Sens L
] for
left sensor or [Sens R
] for right sensor.
After pressing briefly the LED starts flashing. The display indicates
"PosR
" or "PosL
" in combination with the value for the distance to
the other sensor.
Drive the sensor to the desired position.
Confirming the selection will store the value
Parallel re-positioning both sensors – Reference to zero point
Scroll through the list of parameters to the menu point [Sens R/l] or
[Sens L/r]. This function will move both traverses at the same time.
The display will indicate the position of the sensor in capital letters in
reference to the zero point. [Sens R/l] means that the distance of the
right sensor to the zero point is indicated.
If you have not set a zero point the indicated value refers to the home
position of the respective sensor.
Confirming the selection will store the value
