Website
33
"Name" It is used to name the current channel, with containing up to 6
characters.
"Subtrim" It is used to set the midpoint of the current channel. The
maximum value is +100 and the minimum value is -100.
When the mixer of the channel references one or more input setups,
the value of the midpoint will be involved in the calculation of different
curves and different superposition methods.
"Min" It is used to set the minimum output value of the channel. This
setup will limit the final channel output value after various curves and
superimpositions are set.
"Max" It is used to set the maximum output value of the channel. This
setup will limit the final channel output value after various curves and
superimpositions are set.
"Inverted" It is used to set the output reversal of the channel.
"Curve" The selected curve is the used curve for this channel.
"PPM Center" Set the midpoint of the channel. This value will be
superimposed with the value of the trim button.
"Subtrim Mode"
(To be updated...)
Reset
Reset the selected channel to the system default parameters.
Copy Stciks to Subtrim
(To be updated...)
Copy Trims to Subtrim
(To be updated...)
7.3.19 Curves
Up to 32 different curves can be set in the EdgeTX, including "Input
setup", "Mixes", "Input setup", etc.
Click any curve and click "Edit" to set the curve.
"Name" To set the name of the curve.
"Type" You can set two types: "Standard" and "Custom".
"Smooth" When the smooth effect is enabled, the turning point of the
curve will be smooth.
In the "CURVES", you can set up to 17 points. The value of each point can
be set individually. When the set points exceed the maximum number
of points that can be displayed on the screen, slide the screen frame to
switch.
After the curve is set, the shape of the curve will be displayed in the main
interface of "CURVES".
