Website
25
other conditions. The timer starts the counting. When the ON switch
returns to the initial position, the counting pauses.
"Start" After the ON switch of the timer is triggered, it is not affected
by other conditions. The timer starts the counting. When the ON switch
returns to the initial position, the counting does not pause.
"Throttle" After the "ON" switch of the timer is triggered, when the
throttle is not in the lowest position, the timer starts counting. When the
ON switch of the timer returns to the initial position or the throttle returns
to the lowest position, the counting pauses.
"Throttle%" After the "ON" switch of the timer is triggered, when the
throttle is in the highest position, the timer starts counting, to calculate
the time of full throttle. When the ON switch of the timer returns to
the initial position or the throttle is not in the full-throttle position, the
counting pauses.
"Throttle Start" After the "ON" switch of the timer is triggered, when the
throttle is not in the lowest position, the timer starts counting. When the
ON switch of the timer returns to the initial position, the counting pauses.
Note: The timer can be reset in "Reset"function.
Switch
Position switch: You can assign a toggle switch control or telemetry data
control on the transmitter as the ON switch of the timer.
The " ↑ ", " ↓ " and "-" nearby the position switch indicate the
highest, lowest and middle positions respectively. After selecting the
target position of the position switch, you need to click the screen for
confirmation.
When the timer mode setup is completed, toggle the position switch. For
example, "SD ↓ " means the timer is enabled when SWD is in the lowest
position.
Start
It is used to set the duration of the countdown. For example, if it is set to
"01:00" to enable the timer, the timer starts counting down from 1 minute
when the timing condition is triggered.
Minute Call
If this option is selected, the transmitter will broadcast once every one
minute.
Countdown
It is used to set the transmitter broadcast mode and prompt time before
the end of the countdown when the countdown times out.
The countdown prompt is divided into four modes: "Silent", "Beeps",
"Voice", and "Haptic".
Note: "Voice" mode refers to the default sound in the system when there
is no special setup.
Countdown Prompt Time
There are four modes: "5 seconds", "10 seconds", "20 seconds", and "30
