Website
16
Elysium
EL18
5.3 Power On
5.4Binding
Follow the steps below to turn on the transmitter：
1.
Make sure all the switches are at their highest positions and the
throttle is at its lowest position.
2.
Press and hold both of the Power Switches until the screen turns on.
Warning
• The system is now active, please use extreme caution during use.
Warning
• For your safety, make sure the throttle is at its lowest position and switches at their
highest.
1.
Enter the "Model Setttings" menu, then select "Internal RF" to enter the submenu. After setting the corresponding mode,
ie FLYSKY AFHDS 3, suitable type(Classic 18ch, Classic 10ch, Routine 18ch, Fast 8ch or Lora 12ch) and Moudule options(
output signal type of receiver), tap the "Bind" to put the transmitter into bind state.
2.
Press and hold the receiver Bind button while powering on the receiver, release the BIND button after receiver is
powered on or powering on the receiver first, then press and hold the Bind button for 3 seconds, the LED of the receiver
will flash rapidly, indicating the receiver is in bind mode；
3.
The binding process is finished when the LED of the receiver is solid on.
4.
Check to make sure the transmitter and the receiver functions are working correctly, repeat steps 1 to 3 (binding process)
if any problems arise.
Note: For one-way mode,after the receiver LED becomes slow flashing, then put the transmitter to exit the binding
state. At this time, the receiver LED is solid on, indicating that the binding is successful.
TMr receiver supports binding in two-way, follow the steps below to finish.
These steps only apply to the Elysium and it's included receivers. For other receivers please refer to their user
manual.
As the product is constantly updated, please visit the FLYSKY website for the latest transmitter and receiver
compatibility documents.
Danger
• When in use make sure not to fly beyond the maximum range.
Attention • External signal sources may affect signal quality.
Danger
• Check each channel is working correctly before use to avoid any unexpected accidents.
