background image

 

 
Web Site: www.parallax.com 
Forums: forums.parallax.com 
Sales: [email protected] 
Technical: [email protected] 
 

 
Office: (916) 624-8333 
Fax: (916) 624-8003 
Sales: (888) 512-1024 
Tech Support: (888) 997-8267 
 

 

Copyright © Parallax Inc.   

 

Page 1 of 7 

XBee Wireless Pack KickStart (#32440) 

 

 

What It Can Do 

 

Uses a radio link to wirelessly connect two (or more) microcontrollers or other devices, with a 

range of up to 300 feet* 

 

Supports the industry-standard IEEE 802.15.4 communications protocol 

 

Included USB adapter board allows direct connection to a PC 

*Effective range depends on numerous factors, such as use indoors or outdoors, antenna type, 
data speed, obstacles, and nearby objects or equipment that may reflect or interfere with radio 
transmission. Indoor range may be reduced to 100 feet or less, depending on building 
construction. 

The XBee® Wireless Kit contains two self-contained radio transceivers, enabling two devices, 
like a microcontroller and sensor, to wirelessly communicate at data rates of up to 115,200 baud 
— 9,600 baud is the default, and is fast enough for most applications. The XBee Wireless Kit 
can be used to transmit sensor data from one microcontroller to another or from a 
microcontroller to a personal computer. The remote transmitting station can be located in a 
different room, even outdoors. 

 

The XBee Wireless Kit comes with the following components in one package: 

 

(2) Series 1 XBee transceiver modules, with internal PCB-mounted antenna 

Summary of Contents for 32440








Reviews: