Flux VISCOFLUX lite Ex, Original Main Operating Instructions

Page: 28 / 72

28 / 72 Operating instructions VISCOFLUX lite Ex
ENGLI
SH
Attention - danger through liquid spray
> Observe the maximum operating pressure and operating
temperature.
> At high operating pressures, the container and the hoses can burst
or become detached. Ensure that no excessive pressure can occur
during the filling of a container.
> Fill carefully and at an appropriate speed to prevent liquid from
spraying out of the container.
Caution - danger of injury on contact with the pumped medium!
> Follow internal instructions.
> Wear protective clothing (face and breathing protection, protective
gloves, etc.)
Caution!
> Immediately inform the responsible supervisor about defects on the
device.
Attention - material damage!
> If the materials of the VISCOFLUX lite Ex are not resistant to the
liquid to be pumped, these must not be used.
> Observe resistance information and internal instructions.
Information
> Defective parts must always be replaced.
> Use original spare parts.
> When sending components back for repair, a decontamination
certificate must be included (download at www.flux-pumps.com).
Attention!
> Only static dissipative process seals must be used.
Attention!
Unauthorised alterations and the use of spare parts and accessories,
which are not sold or approved by the manufacturer of the equipment
can in some cases cause fire, electric shock and injury.
Attention!
> Observe the operating instructions of the approved motor and the
approved pump. (In the case of three-phase motors, first check the
direction of rotation before use.)