ThermoView
®
TV40 Series
Users Manual, Rev. 1.1, Apr 2019
14
1 Description
The ThermoView Series infrared cameras are rugged thermal imagers designed for industrial process control
applications in demanding industrial environments. An IP67 rating for the housing is provided if the camera
operates with the standard lens and has no external add-on lens attached. All ThermoView infrared cameras are
non-contact, highly sensitive infrared thermal imagers with software controlled variable focus capability. In addition,
a visible light camera is integrated in the front housing to support the sighting functionality.
The infrared radiation, emitted from measured objects, is detected and converted into an electrical signal by a two-
dimensional uncooled focal plane array detector. After this, the amplified analog temperature signal is converted
into a digital signal, which can be displayed and analyzed as a colored thermal image using a PC software.
The ThermoView infrared cameras are equipped with the interface standard GigE Vision for high-performance
industrial cameras. It supports Power over Ethernet (PoE) which combines a high-speed data transmission with
the power supply of the camera even over longer distances.
Figure 1-1: Front and Rear View of ThermoView Series infrared cameras
Pin code for
automatic lens
detection
Infrared
Lens
Visible Light
Camera
Bayonet thread
for add-on lens
Status
LED
1 GBit/s Ethernet PoE
M12 connector, 8 pin
Power supply
WiFi antenna
(not supported)
www.
.com
1.800.561.8187
