Accessories
Electrical Accessories
39
7
7.2.1 Ethernet PoE Cable (A-CB-xx-M12-W08-xx)
The Ethernet PoE cable comes with an eight-pin male M12 connector, assigned to the cameras rear eight-socket
female M12 connector. The corresponding end of the Ethernet PoE cable is equipped with a general RJ45 snap-
in connector. The cable is about 7 mm (0.3 in) in outer diameter.
The LT version of the cable withstands ambient temperatures up to 80°C (176°F), the HT version withstands
ambient temperatures up to 165°C (329°F).
In case of using PoE (Power over Ethernet) to supply the imager with power, the needed power is injected over
the existing data wires.
For information about installation, see section 5.6.1
Figure 7-4: Exemplary Ethernet PoE LT Cable
Table 7-1: Available Ethernet PoE Cables
P/N
Length
Ambient Temperature
A-CB-LT-M12-W08-07
7.5 m (25 ft)
80°C (176°F)
A-CB-LT-M12-W08-25
25 m (82 ft)
80°C (176°F)
A-CB-LT-M12-W08-50
50 m (164 ft)
80°C (176°F)
A-CB-HT-M12-W08-07
7.5 m (25 ft)
165°C (329°F)
A-CB-HT-M12-W08-10
10 m (33 ft)
165°C (329°F)
www.
.com
1.800.561.8187
