ThermoView
®
TV40 Series
Users Manual, Rev. 1.1, Apr 2019
28
6.2 LED
Status Indicator
The ThermoView camera has a built-in multi-color LED in the rear panel, which indicates the current health and
alarm status.
Figure 6-1: LED Status Indicator
The LED patterns are:
1. Blinking yellow
– Booting
2. Solid yellow
– Loading operating system
3. Solid green
– No errors, IP address obtained and Ethernet cable connected
4. Blinking red
– Various errors (can’t talk to engine)
5. Blinking green
– Flash memory being updated
6. Solid blue
– Shutter closed
7. Solid red
– Over ambient temperature
Please note that the camera displays these patterns in a priority order, higher numbered events mask lower
numbered events. So, for example, the camera is connected to Ethernet (solid green) but have an over-
temperature condition. In that case, the LED displays a solid red until the over-temp condition is cleared, then the
LED would display solid green.
LED
Status
Indicator
www.
.com
1.800.561.8187
