Fluke Pan Tilt System, User Manual

Page: 61 / 63

Maintenance
Fuses Replacement
61
9
9.4 Cleaning the Window
Always keep the front window of the pan tilt housing free from contaminations. Care should be taken when
cleaning. To clean the window, do the following:
1.
Lightly blow off loose particles with “canned” air (used for cleaning computer equipment) or a small
squeeze bellows (used for cleaning camera lenses).
2. Gently brush off any remaining particles with a soft camel hair brush or a soft lens tissue (available from
camera supply stores).
3.
Clean remaining “dirt” using a cotton swab or soft lens tissue dampened in distilled water. Do not scratch
the surface.
For fingerprints or other grease, use any of the following:
•
Denatured alcohol
•
Ethanol
•
Kodak lens cleaner
Apply one of the above to the window. Wipe gently with a soft, clean cloth until you see colors on the surface, then
allow to air dry. Do not wipe the surface dry, as this may scratch the surface.
If silicones (used in hand creams) get on the window, gently wipe the surface with Hexane. Allow to air dry.
Note
Do not use any ammonia or any cleaners containing ammonia to clean the window. This may result in
permanent damage to the windows surface!