Fluke Pan Tilt System, User Manual

Page: 48 / 63

Pan Tilt System
Users Manual, Rev. 1.0, May 2020
48
7.2.5 Users
From the menu entry User Configuration it is possible to manage all users that have access to the device.
Administrator type users can access the complete configuration of the device.
Users such as Operators, Users and Anonymous have limited access to the management pages.
Users with limited access can only access the pages:
•
Home (move the pan tilt head and reference the presets)
•
Device Parameters
•
Device Statistics
The password can only contain the following characters (a-z, A-Z, 0-9, ,._+@%/-()^*[]{}#;~).
Figure 7-9: User Page
7.2.6 Movements
From the menu entry Movements is possible to control, via web, all pan tilt parameters.
•
Offset Pan: The pan tilt system has a mechanically defined 0° position. The Offset Pan function allows
the definition of a different 0° position using software.
•
Economy Mode: It reduces the motor's torque when the pan tilt system is at standstill to decrease
consumption. Do not enable in the presence of strong wind or vibrations.
•
Maximum Speed: Sets the maximum manual speed.
•
Ramp Type: This allows you to select the pan tilt accelerations.
(Acceleration/deceleration time: 1 = 1.1 s, 2 = 0.95 s, 3 = 0.8 s, 4 = 0.5 s)
•
Speed with Zoom: When enabled, this parameter automatically slows down the pan tilt speed, based on
the Zoom factor.
•
Tilt Factor: Sets the reduction factor of the tilt axis manual speed. Movement speed factor calculation:
Tilt axis speed = Tilt nominal speed / Tilt factor.
•
Pan Limits: Enables the limits of Pan.
•
Pan Start: Sets the start limit of Pan.
•
Pan End: Sets the end limit of Pan.
•
Tilt Start: Sets the start limit of Tilt.
•
Tilt End: Sets the end limit of Tilt.
•
Sensitivity: It enables selection of detection system sensitivity of unwanted Pan and Tilt movements. If
the threshold set is surpassed, the system will calibrate Pan and Tilt.