Pan Tilt Head Installation
Ethernet Cable
39
5
Figure 5-7: Power Supply Line
Perform the connections following the instructions reported in the table below. The removable connector is supplied
in the kit.
Table 5-2: Connections of the Power Supply Line
Color
Terminal
Power Supply 230 VAC
blue
N (neutral)
yellow/green
brown
L (Phase)
Power Supply 120 VAC
blue
N (neutral)
yellow/green
brown
L (Phase)
5.4 Ethernet Cable
Use the supplied Ethernet cable provided in a length of 10 m (33 ft). Please note, the supplied Ethernet cable is
not for outdoor use. Link the RJ45 connector of the Ethernet cable to the J2 connector on the connector board.
5.5 Operating Mode
The operating mode is preset to “Camera Master” with the system`s shipment via switch DIP1. See the table below
for the settings of switch DIP1.
01
02
Summary of Contents for Pan Tilt System
