Logix
®
Digital Positioners FCD LGENIM0110-0 05/16
flowserve.com
7
DANGER:
Standard industry safety practices must be
adhered to when working on this or any process control
product. Specifically, personal protective equipment must
be used as warranted.
11
QUALIFIED PERSONNEL
Qualified personnel are people who, on account of their
training, experience, instruction and their knowledge of
relevant standards, specifications, accident prevention
regulations and operating conditions, have been authorized
by those responsible for the safety of the plant to perform
the necessary work and who can recognize and avoid
possible dangers.
In unpacking, installing and performing maintenance as
required on FLOWSERVE products, product users and
maintenance personnel should thoroughly review this
manual prior to installing, operating or performing any
maintenance.
12
VALVE & ACTUATOR
VARIATIONS
These instructions cannot claim to cover all details of all
possible product variations, nor can they provide
information for every possible example of installation,
operation or maintenance. This means that the instructions
normally include only the directions to be followed by
qualified personal where the product is being used for its
defined purpose. If there are any uncertainties in this
respect particularly in the event of missing product-related
information, clarification must be obtained via the
appropriate Flowserve sales office.
13
SPARE PARTS
Use only FLOWSERVE original spare parts. FLOWSERVE
cannot accept responsibility for any damages that occur
from using spare parts or fastening materials from other
manufactures. If FLOWSERVE products (especially
sealing materials) have been in storage for longer periods
check these for corrosion or deterioration before using
these products. See section
Error! Reference source not
found.
Error! Reference source not found.
for more
information.
14
SERVICE / REPAIR
To avoid possible injury to personnel or damage to
products, safety terms must be strictly adhered to.
Modifying this product, substituting non-factory parts, or
using maintenance procedures other than outlined in this
instruction could drastically affect performance and be
hazardous to personnel and equipment, and may void
existing warranties.
Between actuator and valve there are moving parts. To
avoid injury FLOWSERVE provides pinch-point-protection
in the form of cover plates, especially where side-mounted
positioners are fitted. If these plates are removed for
inspection, service or repair special attention is required.
After completing work the cover plates must be refitted.
Logix
®
positioner repair is limited to the
replacement of sub-assemblies and circuit boards with
FLOWSERVE-manufactured replacements as outlined in
this manual.
DANGER:
Substitution of with non-factory positioner
components may impair intrinsic safety.
CAUTION:
Before products are returned to
FLOWSERVE for repair or service, FLOWSERVE must be
provided with a certificate which confirms that the product
has been decontaminated and is clean. FLOWSERVE will
not accept deliveries if a certificate has not been provided
(a form can be obtained from FLOWSERVE).
Apart from the operating instructions and the obligatory
accident prevention directives valid in the country of use, all
recognized regulations for safety and good engineering
practices must be followed.
