Flow Fitness PERFORM T2i, User Manual

Page: 49 / 56

User Manual - Flow Fitness PERFORM T2i - 49
5
Use
Every 1 or 2 months (even if the treadmill is not in use) or every
50 hours of use, the sliding surface under the running deck
needs to be lubricated with the included silicone lubricant. Make
sure that the power is disconnected and loosen the adjusting
bolts of the rear roller. Lubricate the surface, distribute the
silicone lubricant evenly. When you are finished fastening the
adjustment bolts of the rear roller. Center the treadmill again as
described below.
When your included silicone lubricant is empty we suggest you
to order Flow Fitness treadmill lotion to keep maintaining your
running surface. The Flow Fitness treadmill lotion has a smart
straw which makes it easy to apply without loosening the belt.
Within the first weeks of using the treadmill, it is possible that you need to centre the belt. For example this can happen when applying more pressure to the
left foot over your right.
Make sure the treadmills is running with a speed between 3 and 5 KPH. At the back of the frame there are two adjustment bolts. These bolts allow you to
adjust the rear roller. When the treadmill is running to the left, you need to turn the left adjusting bolt clockwise on the and the right adjustment bolt counter
clockwise. In the event that the treadmill is right, you have to turn the left adjustment bolt counter-clockwise and the right adjustment screw clockwise. Make
sure the belt stays well tensioned and is not waving.
Maintaining the sliding surface
Centring the belt
The metal and plastic parts of the product can be cleaned by using standard cleaning products. However, make sure that all parts are completely dry before
they are used again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once every six weeks. For fastening use the tool supplied with the product.
To prevent unnecessary wear, the product can only be used indoors and in a dry environment.
Maintenance
Increase tention Decrease tention