FLORABEST FLG 34 C1, Operating Instructions And Safety Instructions

Page: 43 / 164

FLORABEST FLG 34 C1
English - 41
1. Switch the charcoal barbecue off if you wish to top up the charcoal. Turn the control dial (9) counter-
clockwise to the OFF position, until it engages.
2. Remove any remaining food from the stainless steel grate (1).
3. Loosen both latches (7) and remove the stainless steel grate (1). Place the stainless steel grate (1) on
a suitable surface.
4. Remove the cover of the charcoal container (3). It is best to do this with barbecue tongs and always
wear barbecue gloves. Use heat-resistant gloves in accordance with the PPE Ordinance (category II
for heat protection, DIN-EN 407) Otherwise you could get burnt.
5. Place the cover of the charcoal container (3) on a suitable surface.
6. Add the new charcoal to the charcoal container (4). When you do so, make sure that you do not
overfill the charcoal container (4) so that you can close it again once you have finished.
7. Place the cover (3) onto the charcoal container (4). Place the stainless steel grate (1) down again.
Turn the grate such that the two brackets (2) are aligned with the latches (7). Lock the stainless steel
grate (1).
8. Turn the control dial (9) to the MAX position (clockwise until it stops) to power on the fan. Wait a few
minutes for the new charcoal to kindle and for any smoke to dissipate. You can then continue grilling.
8. Maintenance/cleaning
In order to avoid burning food residues, clean the charcoal barbecue after every use.
Risk of burns!
Wait until the charcoal barbecue is completely cool before cleaning it. Otherwise you could
get burnt.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface (e.g.
metal sponges). These could damage the charcoal barbecue.
1. Loosen both latches (7) and remove the stainless steel grate (1).
2. Remove the charcoal container (4) with its cover (3).
3. Remove the grease collection tray/reflector (6).
4. Clean the stainless steel grate (1) and the grease collection tray/reflector (6) in the sink using dish
detergent. You can carefully tap the charcoal container (4) with its cover (3) and clean it using a
brush or dry cloth as needed. Clean the housing (8) with a slightly moistened cloth.