SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page
28
of
70
Antennvägen 6
SE-187 66 Täby
Sweden
1.4.12 Azimuth Drift Dial
(continued)
Legend
FUNCTION
Description
Screen Symbology
Reference/Notes
Span/Gain
Drift Az
SPOTTER
MANUAL
GAIN
3)
Spotter sensor selected;
Manual adjustment of Spotter Gain
by rotating the button/dial
CW/CCW.
Momentary push button resets the
gain level to a factory set pre-
defined value.
No symbology for this
action
SET AZIMUTH
DRIFT
Holding
FUNC
button and adjusting
Drift Az
dial, adjusts the gimbals
drift. (induced by servo loop offset)
To facilitate this action it’s
recommended to select the TV
sensor and zoom in to NFOV.
Adjustments are updated and
saved in the systems non-volatile
memory every 10 seconds.
-
NOTE:
Before this
function/adjustment is
performed, a Joystick
Calibration should be
performed. (See § 1.4.7)
