SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page
10
of
70
Antennvägen 6
SE-187 66 Täby
Sweden
Feature
Condition after initialization
Spotter FOV
Full Narrow
Spotter E-Zoom
N/A
Spotter Iris & Gain
Automatic
Spotter Gamma
Off
1.3.2
Power-off (shut down) procedure:
The system can be powered off from any mode, at any time, without damaging the
system. However, avoid to power-off the system during the initialization phase.
From an operational point of view, it is highly recommended to select STOW prior to
powering off, as the STOW position is important for the protection of the optical windows
during aircraft take-off and landing.
1.3.3
Flying the TCU in an unpowered state
The TCU must be in STOW position if the system is to be flown in an unpowered state
(e.g. during ferry flight.)
NOTE:
The TCU can be moved to STOW by hand if the TCU is not in the STOW position, if the
system is unpowered and prior to flight. STOW position is cons90° lookup (to engage the
STOW magnet) and -180° from the flight path.
1.3.4
Turret Functions
Function
Reference Section/Paragraph
Power ON/OFF
Turret Steering Joystick
Change/Cycle Sensors
(systems with TV and IR)
1.4.11
(systems with TV, IR and Spotter)
Set Azimuth Drift
Set Elevation Drift
Cage
Set Cage position
Zero set Joystick offset
STOW position
Set Time & Date
Set Azimuth Joystick Gain
Set Elevation Joystick Gain
Adjust HCU NVG Backlight
1.4.22
Change Elevation Joystick
Sense
Point Mode
