FLIR UltraFORCE 350-HD, Owner'S Manual

Page: 53 / 70

SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page 53 of 70
Antennvägen 6
SE-187 66 Täby
Sweden
1.10.2 BIT Codes
Code Fault Description LRU
01 Azimuth TM Amplifier Disabled Servo Loop Fault TCU
02 Elevation TM Amplifier Disabled Servo Loop Fault TCU
03 Azimuth DM Amplifier Disabled Servo Loop Fault TCU
04 Elevation DM Amplifier Disabled Servo Loop Fault TCU
05 Scheduler Time Overflow Processor Fault TCU
06 INI File Read/Parse Fault Processor Fault TCU
07 Servo Amplifier Power Fault Servo Loop Fault TCU
08 RSPI Bus Master Fault Internal Comms Fault TCU
09 CCB temp sensor fault Internal temperature
sensor Fault TCU
10 CCB TEC overheat fault High temperature in
system TCU
13 Sensors fault Sensors fault TCU
15 Azm encoder init failed Internal sensor Fault TCU
16 Azm sin/cos signal fault Internal sensor Fault TCU
18 CDT: key values non-equidistant Internal start-up Fault TCU
19 CDT: minimum end key value too
close to low end limit Internal start-up Fault TCU
20 CDT: maximum end key value too
close to high end limit Internal start-up Fault TCU
21 CDT: maximum deviation limit
exceeded Internal start-up Fault TCU
22 CDT: too short calibration time Internal start-up Fault TCU
23 CDT: too long calibration time Internal start-up Fault TCU
24 CDT: incomplete calibration
(missing key values) Internal start-up Fault TCU