Page 18
The information contained in this document pertains to a dual use product controlled for export by the Export Administration
Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to
export or transfer to foreign persons or parties unless otherwise prohibited.
VPC Installation
The VPC module plugs into the Hirose connector on the back of the Tau SWIR camera, as shown in
Figure 8. Use the two M1.6 x 0.35 x 8mm screws included in the kit to secure the module to the camera.
Plug the TEC cable into the TEC power connector on the side of the camera. Install the TEC power cover
plate using the supplied screws.
Figure 9. VPC Module Accessory Kit
