Page 24
The information contained in this document pertains to a dual use product controlled for export by the Export Administration
Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to
export or transfer to foreign persons or parties unless otherwise prohibited.
FLIR Camera Controller Software Interface
This section describes simple communication with the camera using the FLIR Camera Controller GUI and
assumes that the camera is connected to the PC using a USB cable and either the VPC or Camera Link
Accessory Module.
1.
Run the FLIR Camera Controller GUI by clicking on the start menu and accessing
Start
→
All
Programs
→
FLIR Systems
→
Camera Controller GUI.
The software may take up to 30 seconds to load
the first time. The first time the camera is connected, a window will pop up asking the user to
select the camera type. Select SWIR.
Figure 15. Select Camera Manager
2.
When the GUI first opens, it will display “Not Connected” on the bottom left (see Figure 16). The
first step is to connect to the camera.
