427-0064-00-12 Version 100
August 2017
7
1
Camera Installation
1.3.4
Mounting Accessories
The following mounting accessories are available from FLIR Systems, Inc. for installing the
FB-Series O camera. For more information on available options, contact your FLIR sales
representative or visit
www.FLIR.com/security
to request details on where to get the accessories you
need.
1.3.5
Site Preparation
There are several requirements to address prior to installation at the site. The following
recommendations provide for proper installation and operation of the unit
.
Adhere to all local and
industry standards, codes, and best practices.
•
Ambient Environment Conditions
: Avoid positioning the unit near heaters or heating system
outputs. Avoid exposure to direct sunlight.
•
Safety
: Cables and electrical cords should be routed in a manner that prevents safety hazards.
Ensure that nothing rests on the unit’s cables or power cords.
•
Ample Air Circulation
: Leave enough space around the unit to allow free air circulation.
•
Cabling Considerations
: Using a cable longer than the manufacturer’s specifications for optimal
video signal may result in degradation of color and video parameters.
•
Physical Security
: The unit provides threat detection for physical security systems. In order to
ensure that the unit cannot be disabled or tampered with, the system should be installed with
security measures regarding physical access by trusted and untrusted parties.
•
Network Security
: The unit transmits over IP to security personnel for video surveillance. Proper
network security measures should be in place to assure networks remain operating and free from
malicious interference. Install the unit on the backbone of a trusted network.
•
Electrostatic Discharge Safeguards
: The unit and other equipment connected to it (relay
outputs, alarm inputs, racks, carpeting, etc.) shall be properly grounded to prevent electrostatic
discharge.
Wall Mount Junction Box CB-WLBX-62
Pole Mount Junction Box CB-PLBX-62
