FLIR Ariel Gen III CM-3304-11-I, User And Installation Manual

Page: 81 / 128

75 September 4, 2017
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
9.3.2 Streaming Tab
The Streaming tab is used for configuring video settings , privacy zones , and region of interest settings.
9.3.2.1 Video Settings
The Video Settings screen is used for configuring the streams and such video parameters as resolution;
video compression type and related settings; quality of service; and frame rate. Additional settings are
available when using H.265 and H.264 compression.
Video Settings Screen
9.3.2.1.1 Configuring Video Settings
To configure video settings
1. From the Current Profile drop-down list, select 1, 2, or 3 . The default is 1 .
Each of the three Current Profiles has its own settings. The available parameters depend on the
selected resolution. Each profile supports up to three concurrent streams (Stream1, Stream2, and
Stream3), which can be configured separately to send two streams simultaneously with optimized
quality and bandwidth.
2. From the Corridor drop-down list, select ON if you want to use this viewing mode. The image
rotates 90° counter-clockwise (to the left) and is displayed in 16:9 aspect ratio. This mode is
recommended when monitoring a long, narrow area, such as an aisle, hallway or corridor. This
mode is referred to in Latitude as “90 and 270 degrees” mode when configuring the
Rotate Image
setting for the camera.