FLIR Ariel Gen III CM-3304-11-I, User And Installation Manual

Page: 73 / 128

67 September 4, 2017
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
To set the arming schedule
1. See instructions in the Alarm section.
9.3.1.5.4 Network
The Events Source > Network screen is used for enabling notification in case the network connection is
lost or if there is another device on the network that is using the same IP address as the camera. This
screen enables you to:
·
Sending an alarm if the network connection is lost or if there is a network conflict
·
Recording an event in the camera’s microSD card
·
Displaying text on-screen if the network connection is lost or if there is a network conflict
Events Source > Network Screen
To enable notifications
1. Select Enable . By default, Enable is not checked.
2. Click Save .
To start recording
1. In the Recording section, select the Record on Edge checkbox. By default, it is not checked.
2. Click Save .
To activate the on-screen display
1. In the OSD section, select Enable . By default, Enable is not checked.
2. In the Text text box, enter the text to display in the on-screen display.
3. Click Save .
9.3.1.5.5 Schedule
The Events Source > Schedule screen is used for:
·
Setting a trigger interval for notifications
·
Sending an alarm
·
Defining the method for storing a snapshot in the camera’s microSD card
·
Sending a snapshot of the event to an FTP server
·
Recording an event in the camera’s microSD card
·
Sending email notifications
·
Setting the alarm schedule