FLIR Ariel Gen III CM-3304-11-I, User And Installation Manual

Page: 25 / 128

19 September 4, 2017
Configuring the Unit’s Initial IP Address
CM-3304/CM-3308 User and Installation Guide
7 Configuring the Unit’s Initial IP Address
Use the FLIR DNA utility to discover the unit on the network and to set the unit’s initial IP address.
·
If the camera is located on a network that uses a DHCP server, or is managed by FLIR’s Horizon
or Meridian VMS and is configured as a DHCP server, configure the camera with
DHCP-enabled .
Horizon or Meridian automatically assigns the camera an IP address.
·
If the camera is located on a network that does not use a DHCP server, or is managed by FLIR’s
Latitude VMS, manually enter its IP address in the DNA utility.
Note:
1. It is possible to set the IP address without changing the subnet.
2. The unit and the PC must be physically connected on the same network segment.
To manage the camera using Horizon, Meridian, or on a DHCP-enabled network
1. Insert the CD included in the package in your computer’s disk drive.
2. Run the
dna.exe
file by clicking the icon. The DNA application opens and the device is
displayed in the window.
DNA Discovery Window
3. Click on the unit in DNA’s Discover List. The CM-330x Login window opens.
Login Window
4. If the camera cannot connect to a DHCP server, the unit initializes with the default IP address
(192.168.0.250).