FLIR Ariel Gen III CM-3304-11-I, User And Installation Manual

Page: 72 / 128

September 4, 2017 66
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
·
Sending email notifications
·
Displaying text on-screen upon a motion event
·
Setting the arming schedule
Events Source > Motion Screen
Note:
If the camera is attached to Latitude, motion detection configuration should be done from Latitude
Admin Center, not from the web interface.
To enable motion settings
1. Click Enable . By default, Enable is not checked.
2. Click Save Area .
To configure motion zone area settings
1. From the Sensitivity drop-down list, select High, Medium, or Low . The camera reacts to slight
changes in motion or brightness in the motion zone when set to High , while the camera reacts to
big changes in brightness or motion when set to Low .
To define the method to store a snapshot
1. See instructions in the Alarm section.
To record the event on the camera
1. See instructions in the Alarm section.
To enable sending an email notification
1. See instructions in the Alarm section.
To define OSD text
1. See instructions in the Alarm section.