FLIR Ariel Gen III CM-3304-11-I, User And Installation Manual

Page: 80 / 128

September 4, 2017 74
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
9.3.1.6.6 Snapshot
The Snapshot screen is used for configuring snapshot settings.
Events Handler > Snapshot Screen
To configure snapshot settings
1. In the Pre-Event Capture Count text box, enter the number of frames ( 1 to 10 ) to capture before
taking a snapshot of an event. The default is 3 frames.
2. In the Event Capture Interval text box, enter the time interval ( 1 to 10 seconds) to capture between
snapshots. The default is 1 frame.
3. In the Post-Event Capture Count text box, enter the number of frames (more than one) to capture
after taking a snapshot. The default is 3 frames.
4. Click Save .
9.3.1.6.7 Sound
The Sound screen enables you to upload up to 10 small PCM audio files. These sound files can be
triggered upon any event that is set in the Events Source section. For example, you can trigger one
warning recording that alerts an intruder that he has been detected and then a stronger warning to not to
proceed if he has not left the scene. The file will be played when the audio is enabled on the
Sound screen
and the triggering event occurs.
Sound Screen