117-00008 Rev 3.0 Flightcell® DZMx Installation Manual
Page 59 of 75
Effective Date: 18 February 2022
Next, configure the DZMx to transmit the data:
»
Go to Settings > Preferences > Logging Email Reporting
»
Enter the destination email address
»
Select what data is to be emailed
»
Toggle Logging Send Email Data Automatically on if you want the data to be sent
automatically. If selected, the DZMx will send the data for each flight when it is next
powered on.
Recording and Transmitting Maintenance Data
The DZMx supports maintenance timers (also known as a Hobbs Meter). The DZMx can record
and transmit the following:
»
TTAF (Total Airframe Flight Time (hrs)). This records all flight time in hours and tenths of
hours. The aircraft airframe hours are entered on installation, and this is incremented
during every flight.
»
DFT (Daily Flight Time) This is a continuous timer that records flight time in hours and
tenths of hours. It must be manually resent, and can be reset daily or reset periodically to
allow the user to measure a flight or sequence of flights.
Note
:
The starting TTAF value can only be done once so it is important to set it correctly. A
pin number or Hobbs password is required from Flightcell to change the flight hours after the
initial set up.
