117-00008 Rev 3.0 Flightcell® DZMx Installation Manual
Page 56 of 75
Effective Date: 18 February 2022
»
If the state is wrong (e.g. DZMx
reports “
Collective is Up
” when it is down
, go to
Input Configuration and change the selected condition.
DZMx Outputs
The DZMx has two outputs, which are switches that can be used to turn an electrical signal on or
off. A typical use of an output is to energise a ring alert light on the aircraft panel.
Each output has two terminals, A and B. The output consists of an isolated switch, internal to the
DZMx. When the output is active, the switch is closed (terminals A and B are connected). When
output is inactive, the switch is open (terminals A and B are disconnected). The outputs can be
configured to flash or simply turn on/off.
The events that can be configured to trigger the outputs on the DZMx are:
»
Off Hook: Turned on when the operator is dialling, or in a call.
»
Incoming Call: Alerts the operator when there is an incoming call.
»
PTT Transmitting: A device in the talk group is transmitting.
»
Received Msg: Alerts the operator when a text message has been received or a call has
been missed.
»
Power Indicator: Alerts the operator when the DZMx is powered on.
To select the allocation of the outputs and the blink pattern using the DZMx control head, go to
MENU > Hardware Config > Outputs Config
and select the appropriate setting.
»
Off Hook Output > [Disabled | Output 1 | Output 2]
»
Off Hook Mode > [Off | Solid | Blink]
»
Incoming Call Output > [Disabled | Output 1 | Output 2]
»
Incoming Call Mode > [Off | Solid | Blink]
»
PTT Transmitting Output > [Disabled | Output 1 | Output 2]
»
PTT Transmitting Mode > [Off | Solid | Blink]
»
Received Msg Output > [Disabled | Output 1 | Output 2]
»
Received Msg Mode > [Off | Solid | Blink]
»
Power Indicator Output > [Disabled | Output 1 | Output 2]
»
Power Indicator Mode > [Off | Solid | Blink].
Note:
Some specialised input functions will only appear in the Input Configuration
menu if the application (e.g. airline, firefighting or PTT) is enabled.
