16 Settings
UMFLUXUS_G8V4-6-1EN, 2018-10-10
115
16.2.6
Alarm State Indication
16.2.7
Units of Measurement
It is possible to set the units of measurement for the length, temperature, pressure, density and kinematic viscosity and
sound speed:
16.2.8
Setting for the Fluid Pressure
It is possible to set whether the absolute or the relative pressure will be used:
Select
on
to display the alarm state during the measurement.
For further information on the alarm outputs see section 18.6.
Select
mm
or
inch
as the unit of measurement for the length. Press ENTER.
Select
°C
or
°F
as the unit of measurement for the temperature. Press ENTER.
Select
bar
or
psi
as the unit of measurement for the pressure. Press ENTER.
Select
yes
if lb/ft³ is to be used as the unit of measurement for the density.
Select g/cm³ or kg/m³ as the unit of measurement for the density. Press ENTER.
This display will only be indicated if lb/ft³ has not been selected as the unit of measurement
for the density.
Select mm²/s or
cSt
as the unit of measurement for the kinematic viscosity. Press ENTER.
Select
m/s
or
fps
as the unit of measurement for the sound speed. Press ENTER.
Select
on
or
off
. Press ENTER.
If
on
is selected, the absolute pressure p
a
will be displayed/input/transmitted.
If
off
is selected, the relative pressure p
g
will be displayed/input/transmitted.
p
g
= p
a
- 1.01 bar
The pressure and its unit of measurement will, e.g., be displayed in the program branch
Parameter
. It will be followed by the selected pressure, indicated in parentheses.
a - absolute pressure
g - relative pressure
Note!
The standard pressure in
Special Funct.\SYSTEM settings\Gas-Measuring\Norm/Std
press.
is entered as the absolute pressure.
Note!
The settings will be stored at the end of the dialog.
SHOW RELAIS STAT
off
>ON<
Length unit
>[mm]<
[inch]
Temperature
>[°C]<
[°F]
Pressure
>[bar]<
[psi]
Density [lb/ft3]
no
>YES<
Density unit
g/cm3
>kg/m3<
Viscosity unit
mm2/s
>cSt<
Soundspeed unit
>[m/s]<
[fps]
Pressure absolut
off
>ON<
Fluid pressure
1.00 bar(a)
