Flexim FLUXUS G800 User Manual Download Page 112

Page: 112 / 161

FLUXUS G80x

15 Libraries

112

UMFLUXUS_G8V4-6-1EN, 2018-10-10

15.5.3

Adding all Materials/Fluids to the Scroll List

15.5.4

Removing a Material/Fluid from the Scroll List

15.5.5

Removing all Materials/Fluids from the Scroll List

Select

Add all

to add all materials/fluids of the database to the current scroll list. Press

ENTER.

Select

Remove Material

Remove Medium

to remove a material/fluid from the scroll

list. Press ENTER.

All materials/fluids of the current scroll list will be displayed in the lower line.
Select the material/fluid. Press ENTER. The material/fluid will be removed from the scroll
list.

Note!

User defined materials/fluids will always be displayed in the scroll lists of the program branch

Pa-

rameter

. They cannot be removed.

Select

Remove all

to remove all materials/fluids from the scroll list. Press ENTER. User

defined materials/fluids will not be removed.

Material list

↕

>Add all

Material list

↕

>Remove Material

↕

Stainless Steel

Material list

↕

>Remove all

Summary of Contents for FLUXUS G800


































































































































































Search results

Summary of Contents for FLUXUS G800

Reviews:

Related manuals for FLUXUS G800

Brands by name

Popular brands

Flexim FLUXUS G800, User Manual

Search results

Summary of Contents for FLUXUS G800

Reviews:

Related manuals for FLUXUS G800

Brands by name

Popular brands