Flavor Burst CTP 80BEV, Equipment, Maintenance And Operations Manual

Page: 69 / 76

68
5. Make your flavor selections on the next
screen by touching the flavor button. Once
a flavor is selected, the button moves to a
list on the left. To deselect a flavor, touch
the button again and it will disappear from
the list. If the screen shows an option to
use a recipe, press the USE PREDEFINED
RECIPE button and select a recipe.
NOTE: SERVING SIZE WILL DETERMINE
HOW MANY FLAVORS CAN BE SELECTED.
FOR EXAMPLE, A SMALL SERVING MAY
ONLY ALLOW FOR 2 FLAVORS BECAUSE
THE SYSTEM SETTINGS DON’T ALLOW
ENOUGH TIME FOR MORE. TO ADJUST THE
SERVING SIZE TIME OR FLAVOR DISPENSE
TIME, SEE SECTIONS “ENABLE OR DISABLE
SERVING OPTIONS” AND “ADJUST
DISPENSE TIME LIMITS” OF THE
MAINTENANCE MENU.
6. Hold a container under the spout to catch
flavor product. Pull the draw handle down
to dispense product. If you have the timed
servings enabled, draw the serving until the
system sounds a beep and the screen
notifies you to stop drawing product. Return
the handle to the closed position at the end
of the serving.
NOTE: IF YOUR SYSTEM HAS A DRAW
HANDLE SWITCH, PRESS THE SWITCH
AGAINST THE DRAW HANDLE WHILE
MOVING THE DRAW HANDLE INTO THE
FULL “OPEN” POSITION. THIS ACTIVATES
THE FLOW OF SYRUP TO THE SPOUT.
NOTE:
IF THE FREEZER IS EQUIPPED
WITH A DRAW HANDLE SWITCH, RELEASE
THE SWITCH ONE SECOND BEFORE
CLOSING THE SERVING. THIS WILL STOP
THE FLOW OF SYRUP WHILE GIVING THE
UNFLAVORED PRODUCT ENOUGH TIME TO
CLEAR THE BLENDING HEAD OF EXTRA
FLAVORING AND REDUCE CARRYOVER TO
THE NEXT SERVING.
NOTE: THE SYSTEM DISPENSES THE
FLAVORS IN THE ORDER THEY WERE
SELECTED. ALLOW ENOUGH TIME FOR
EACH OF THE FLAVORS TO CYCLE
THROUGH. IF THE SERVING IS CUT OFF
TOO SOON THE SYSTEM MAY NOT
DISPENSE ALL THE CHOSEN FLAVORS IN
YOUR SERVING.
26211