flamco FlexFiller Direct G4, Installation And Operating Manual

Page: 8 / 36

Manual FlexFiller Direct G4
8
Emergency- STOP / Emergency-OFF
To conform with directive 2006/42/EG an EMERGENCY-STOP facility is to be made available during
installation.
Preferably, use a grounded wall socket for the power supply to the unit. The socket must stay
accessible. If the unit is directly connected to the power supply, make sure the power supply line is
provided with:
• a high-sensitivity differential switch (30mA) (residual current device RCD)
• a mains isolator switch with a contact gap of at least 3 mm.
When additional security measures with EMERGENCY-OFF devices are required according to the
design and operation of the heat generator, these are to be installed on-site.
Obvious misuse
• Operation at incorrect voltage and/or frequency.
• Use in inappropriate system designs.
• Use of unpermitted installation materials.
Other hazards
• Overload of construction parts by the presence of unpredictable extreme values.
• Operational continuity at risk in the case of changed, non-permissible ambient conditions.
• Operational continuity at risk in the case of safety-control parts being taken out of service or
malfunctioning.
5.4 Staff qualification
Definitions:
• Operator: A person or legal entity who is the owner of the product and uses the aforementioned
product, or is nominated to use it, under the terms of a contractual agreement.
• Principal: The legally and commercially responsible party in the execution of construction
projects. Legally and commercially liable client in the commission of building projects.
• Responsible person: The representative appointed to act by the main contractor or operator.
• Qualified person (QP): A Qualified Person must have undergone advanced technical training
and have sufficient experience to independently perform complicated tasks or work associated
with residual hazards. Such experience will in each instance refer to a specific specialism, e.g.
maintenance, working on electrical systems, systems mechanic for wholesome water (potable),
sealed heating/cooling and air conditioning technology. In preparation for impending work, a
Qualified Person must be able to correctly estimate the feasibility, risks and hazards as well as the
equipment required. A Qualified Person is expected to be able to understand complex, minimally
prepared plans and descriptions, and to obtain missing and required detailed information by
suitable means.
The product must be installed by a Qualified Person with regard to the following relevant
requirements:
• The Health and Safety Regulations
• Building Regulations
• IEE Regulations
• Water Supply (Water Fittings) Regulations
• Water By-laws (Scotland)
• Any other by-laws or planning requirements.