Manual FlexFiller Direct G4
20
9 Operation
Once commissioned, the pressurisation unit should operate without any user intervention. Under
normal operating conditions, the display will show the current system pressure in Bar.
For an overview of the main operation screens, see image below.
A clarification of menu icons, function and location can be found in Appendix 1: Icon library
Home screen
While the unit is filling, the display will show the current status of the unit and its actuators (valves).
The system to which the unit is connected, is monitored and the icon in the top right corner signifies
its status.
Idle screen
When the unit is not active for a period of 30 seconds (standby), the display will show the total top up
amount in litres over a period of 28 days and the date of the next service.
Maintenance screen
Tapping the right arrow button “
>
” will show additional parameters like the set pressure, mains
pressure, legionella setting & duration and controller serial number.
Warning screen
Shows every active warning since the last time the warning screen has been cleared.
If the pressurisation unit is showing a fault code on the Home screen display, tapping the left arrow
button “
<
” will reveal the active fault message(s). The user can see an extended explanation of the
fault and by pressing the tick-button “
✓
” whilst on the selected fault.
To resolve the fault, simply click the tick-button “
✓
” again and the fault will be cleared.
To exit the extended explanation screen without resolving the fault, press the return- button " ".
When the fault condition is not resolved it will return on the display. Please use the troubleshooting
guide in Appendix 4 to resolve each fault accordingly.
2.2
2.2
23.5 L
28 days
05/07/2022
2.2
2.2
ON - 3 days
22345A13I2A
2.2
2.2
18 PRESSURE TO HIGH
2.2
2.2
117.2 L
Top up on
2.2
2.2
2.2
2.2
2.2
2.2
4:58
OR
OR
OR
17
2.2
2.2
CURRENT ALARMS (7)
18 Pressure to high (3)
2.1 bar
3.0 bar
Clear
117.2 L
Top up off
117.2 L
Drain open
.
Anti Legione
The system pressure is too
high. Top-up disabled until
issue resolved.
12-04-2022 14:30
Summary of Contents for FlexFiller Direct G4
Page 1: ...www flamcogroup com manuals FlexFiller Direct G4 ENG Installation and operating manual...
Page 33: ...We reserve the right to change designs and technical specifications of our products 33 ENG...
Page 34: ...Manual FlexFiller Direct G4 34...
Page 35: ...We reserve the right to change designs and technical specifications of our products 35 ENG...
