www.eu.fishersci.com/fisherbrand
23
2.4.3 Installing the Water Tank
Illustration of the PE Water Tank Assembly
Tank Top View
Tank Base Backside View
1) Remove end caps on all ports
2) Take the 1/4 inch (6.35 mm) tubing and 3/8 inch (9.53) out from the
system accessories bag, cut a piece in proper length of each tubing for the
tank installation.
3) Connect 1/4 inch tubing to the "TO TANK" on the system and "INLET" at
the base of the PE tank, and connect the 3/8 inch tubing to the "FROM
TANK" on the system and "OUTLET" at the base of the PE tank.
4) Take the transparent tubing with check valve from the system accessories
bag. Cut it to the appropriate length for your use. Connect it to the
Vent filter
Level Sensor
Tank Vent Filter
Overflow tubing
Check valve
External
connection Ports
Tank Level Sensor
Point of Use Faucet
