Fisher PLC-XU10N, Owner'S Manual

Page: 12 / 48

12
CONNECTING THE PROJECTOR
CONNECTING TO THE IBM-COMPATIBLE COMPUTER
To connect with the IBM-compatible computer, refer to the figure below.
· VGA CABLE (supplied)
· MOUSE CABLE FOR PS/2 PORT or SERIAL PORT (supplied)
· MCI SERIAL CABLE (supplied)
· MONITOR CABLE (not supplied)
· AUDIO CABLE (stereo /not supplied)
◆
Be sure to connect the MOUSE CABLE corresponding with the terminal of your computer.
Use Cables and Adapter indicated below.
IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA)
VGA Cable (supplied)
Monitor Output
Desktop type Laptop type
Monitor
Audio Speaker
(stereo)
Audio Amplifier
MCI Serial Cable (supplied)
Mouse Cable for Serial Port (supplied)
Mouse Cable for PS/2 Port (supplied)
Audio Cable
(stereo / not supplied)
Monitor Cable (not supplied)
Terminal Terminal
Serial port Serial port PS/2 port Audio Output Audio Input
To each terminal of your computer To the Monitor
NOTE :
When connecting the cable, the power cords of both the projector and the external equipment should be
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched
on.