Failure to follow these instructions could result in damage to the countertop surface.
• Level and align the downdraft unit in the cabinet. Push the support leg mounting bracket on each side down
against the cabinet floor. Mark the top edge of the mounting bracket on the downdraft unit and the mounting
holes on the cabinet floor Fig.6.
Fig.5
Fig.6
4. Remove the Downdraft from the Cabinet
• Remove the screws from the countertop and lift the downdraft unit back out of the cabinet.
• Pre-drill the marked mounting holes in the cabinet floor.
• Tighten the support leg mounting brackets on the unit at the pre-marked positions.
• Place the downdraft unit on a flat protected surface to prevent damage in order to install the blower.
Updated: Fri, 28 Jun 2019 03:30:59 GMT
Powered by
11