Fig.1
Fig.3
Fig.4
Fig.2
3. Temporarily Insert the Downdraft into the Cabinet
• With the assistance of another person, lift the downdraft unit into the prepared cutout in the cabinet. The over
counter mounting brackets should rest on the countertop.
• Secure the downdraft unit to the countertop with two 19/32” (15 mm) screws.
• Install the under counter mounting brackets underneath the countertop for additional support. First, loosely
screw the brackets into the sliding nuts in the downdraft unit using 3/16” (5 mm) screws and push them up under
the countertop. Pre-drill the mounting holes into the countertop from underneath. Check that the mounting
screws are the proper length and will not extend through the countertop surface when tightened Fig.5.
Updated: Fri, 28 Jun 2019 03:30:59 GMT
Powered by
10
