Installation Instructions
9.12.14
Kapitel/Chapter 6: Installation Instructions - Seite/Page 113
6.13 Voltage Control System - see VCS datasheet
The VCS control is used for the adjustment of the number of revolutions of the engine and thus the voltage of the
generator. It belongs to the accessories and is externally attached.
6.14 Set into operation
After the installation the generator must be brought in service. For this the „Service record and warranty registration
must be worked through and filled out by the installing technical trained person.
This document must be handed out to the owner. The owner must be instructed for the operation, maintenance and
hazards of the generator. These include the in the manual mentioned hazards and further ones, which are the result
of the specific installation and the connected components.
Note!:
Send the original Service and warranty record to Fischer
Panda to get full warranty. Make a copy for your hands.
