CM6300
Install Guide
Alarm System
www.firstechonline.com | www.compustar.com
At the end of menu 4, if diesel mode or auxiliary setting functions were enabled – or if any of the auxiliary
outputs were set to “Program”, the duration of these settings can now be adjusted.
Following the auxiliary and diesel settings (if selected), the POC options will be displayed on the OP500.
The POCs can be set between 0 (default) and 19. All are only available on the CM5000.
STEP 3:
When finished with the adjustment of the various option settings, press and hold the “W” (write)
button until the OP500 chirps, which is approximately 2.5 seconds. This will write the settings to the control
module. Wait until the module displays “Success” before disconnecting it from the antenna cable.
To reset the options, hold the “R” (reset) button and the “W” (write) button for 2.5 seconds. Release then
write the reset, hold the “W” button until the OP500 chirps, which is approximately 2.5 seconds.
Option Programming Using a Remote
Using a remote is a timed process so read this section in its entirety before beginning.
IMPORTANT:
Special Option Groups cannot be programmed with a remote – the OP500 must be used.
STEP 1:
Select the option menu that contains the desired programming option.
To program options use the following button combinations:
Copyright 2012 Firstech, LLC.
Page 28
How to Program Options with 5 Button 2-Way Remotes
W
ith 2 W
ay
R
emotes
(W
ait for chirp
between each
tap)
Scroll Through
Menu
(W
ait for chirp
between each tap)
W
ait for corresponding parking light flash and/
or siren chirp before selecting the option
Select Option 1
Select Option 2
Select Option 3
Select Option 4
Option
Menu 1
(F + Trunk) for 2.5 seconds
then (F + Trunk) for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Tap Trunk
Button
Tap Key
Button
Option
Menu 2
(F + Trunk) for 2.5 seconds
then (F + Key) for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Tap Trunk
Button
Tap Key
Button
Option
Menu 3
(F + Key) for 2.5 seconds
then (F + Trunk) for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Tap Trunk
Button
Tap Key
Button
Option
Menu 4
(F + Key) for 2.5 seconds
then (F + Key) for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Tap Trunk
Button
Tap Key
Button
