Firstech CM600-AS, Installation Manual

Page: 14 / 24

14
Option Programming Tables
IMPORTANT: System must be unlocked before you can set options with the OP500 or remotes.
Feature Default Setting - I
Optional Setting -
II
Optional Setting -
III
Optional Setting -
IV
1-01 Unlock Before, Lock After Starting Off On
Lock After Start
Only
Lock After
Shutdown Only
1-02 Lock/Unlock Pulse Duration 0.8 sec 2.5 sec 0.125 sec 3.5 sec
1-03 Double Pulse Locks Off Unlock Lock Both
1-04 D
river’s Priority Unlock
Off On
1-05 Double Pulse Disarm Standard Double Pulse
1-06 IGN+ACC Pulse with Disarm Off On
1-07 Remote Start Runtime 15 Min 25 Min 45 Min 3 Min
1-08 Auto Rearm Off 30 Seconds 60 Seconds 5 Minutes
1-09 Passive Arming Off On
Passive Without
Locks
1-10 Trunk Output Timing 1 sec 0.5 sec 2 sec
Program → Aux 3
1-11 Unlock/Disarm with Trunk Release
Unlock, Factory
Disarm, and Trunk
Release
Factory Disarm,
Trunk Release Only
Trunk Release Only Aux 3
1-12 Dome Light Delay Off 5 Seconds 45 Seconds Auto
1-13 Trigger Start Triple Pulse Double Pulse Single Pulse
Feature Default Setting - I
Optional Setting -
II
Optional Setting -
III
Optional Setting -
IV
2-01 Timer Start 3 hour 1.5 hour
2-02
Minimum Crank Time w/ Tachless
Mode
0.8 or 1.0 sec by
feature 2-05
1.4 sec
2-03 Ignition Locks Off On Ignition Lock Only Ignition Unlock Only
2-04 Engine Sensing Tachless Tach Alternator
3 sec Start Assume
Running
2-05
Minimum Crank Time w/Alternator
Sensing
0.8 sec 1.0 sec 0.6 sec
2-06 Diesel Timer OFF 7 sec 18 sec
Delayed Ignition
(GM)
2-07 Rearm Output
1st lock after start
and after shutdown
1st lock, shutdown After Start Only
After Shutdown
Only
2-08 Siren Duration 30 Seconds 60 Seconds 120 Seconds
Chirp for 20
Seconds
2-09 Siren Output
On Lock, Unlock,
and Start
On Double Lock On Lock and Unlock Alarm Only
2-10 Horn Output On Double Lock On Lock and Unlock
On Lock, Unlock,
and Start
Alarm Only
2-11 Horn Honk Pulsed Latched
2-12 (-) Ground When Armed
Starter Kill + Anti-
Grind
Latched when
armed
20 Seconds
Program → Aux 4